NHAT NAM ENGINEERING

Automatic visual inspection machine for ampoules, vials, cartridges and syringes.

The AV-E is the cutting-edge technology for the high-speed automatic inspection of pharmaceutical products such as vials, cartridges, ampoules¿ and syringes (mod. AV-EGS), ¿which represents the ideal solution to ensure that SVP products are essentially free of particulate and cosmetic defects.

Chlorine Dioxide System

Bello Zon CDLb H2SO4

8 – 89 g/h chlorine dioxide generation

Bello Zon CDLb H2SO4 especially for applications critical with regard to corrosion for the production of low-chloride chlorine dioxide liquid. With the chlorine dioxide system, ClO2 is produced discontinuously following the acid/chlorite procedure.

Gentle disinfection without corrosion

The system produces an extremely low-chloride chlorine dioxide solution from sodium chlorite and sulphuric acid instead of hydrochloric acid. Batch production is an extremely safe, managed process. The low-chloride CDLb solution is suited to disinfection applications in sensitive stainless steel environments such as tunnel pasteurisers, autoclaves, cooling circuits, belt-based lubrication systems.

The chlorine dioxide is buffered in an integrated or external buffer tank at a concentration of 1500 mg/l.

The broad product range of metering pumps and control variants can be used to run several points of injection with chlorine dioxide from one buffer tank.

The closed gas circuit prevents chlorine dioxide from being able to escape from the system, guaranteeing economical and environmentally friendly operation with minimal use of chemicals.

Your benefits

  • Very little potential for corrosion due to the low chloride concentration
  • Ideal specifically for circulation systems
  • Simple way to provide several points of injection
  • Outstanding operating safety and reliability thanks to intrinsically safe process control
  • System monitoring in real-time from any location via DULCONNEX Platform: improved process reliability, overall reliability and transparency through real-time monitoring, individual alarms and automated reports

Technical Data

  • Power supply: 100-230 V, 50/60 Hz
  • Inputs: 2 freely configurable digital inputs for the Pause, High metering, Intermittent metering or Manual metering functions as well as an external common alarm, 4 digital inputs for monitoring the chemical supply (warning / empty message), 1 digital input for contact water meter 0.25 – 20 Hz, 1 frequency input for water meter 10 – 10,000 Hz
  • Outputs: 1 operating signal relay, 1 alarm signal relay, 1 warning signal relay, 1 +5 V voltage output as supply voltage for water meter with Hall sensor
  • Operating substances: 7.5% sodium chlorite, purity in accordance with EN 938, 25 % sulfuric acid, purity in accordance with EN 899, potable water
  • Degree of protection: IP 65

Technical Detail

TypeGeneration capacityOperating temperatureConcentrationMinimum metering rateDimensions H x W x DWeight
g/h°Cmg/ll/hmmkg
CDLb 08 H2SO4810…401,50081,236 x 878 x 30642
CDLb 16 H2SO41610…401,500131,236 x 878 x 30646
CDLb 41 H2SO44110…401,500301,550 x 800 x 34573
CDLb 89 H2SO48910…401,500-1,300 x 880 x 42555

Ambient conditions:

Type CDLb H2SO48 g/h16 g/h41 g/h89 g/h
Water inletProMinent/Neutral12-912-912-9Di20/DN15
SwitzerlandDi20/DN15Di20/DN15Di20/DN15Di20/DN15
Connector dimensions of metering pump for acid and chlorite6×46×46×46×4
ClO2 outputwith internal storage/pump/back pressure valve6-412-912-9
with internal storage/pump6-412-912-9
with internal storage, without pump6-412-912-9
with external storage, without pump (reactor outlet)12-912-912-9Di25/DN20
external storage (suction lance connector)Di25/DN20Di25/DN20Di25/DN20Di25/DN20

Brand